RESQTEC Equipment
EDD TECHNOLOGY
A new era starts for rescue extrication equipment; Electronic Direct Drive (EDD) Technology direct from the motor to the output force. No need for hydraulic fluids, pump, valves or seals. Simply direct from a compact and powerful efficient motor that drives a screw piston.
NO HYDRAULICS
Hydraulic systems overheat which can create all kinds of problems. The current integrated tools have little room (small reservoir) needed to cool down the hydraulic fluid in its system. This limits the running time. EDD is not affected by heat issues. It therefore can provide much longer running time. EDD works well in hot and cold environments. Its high durability requires little to no maintenance.
LONG RUNNING TIMES
Each tool is powered by the latest lithium-Ion technology. The battery conforms to the IEC 62133 safety standards and the UN 38.3 shipping requirements for lithium batteries. The motor technology leveraged in EDD produces more than a staggering 1.4kW which is similar to a small gasoline engine currently used in hydraulics pumps. The motor runs close to 90% efficiency and drives a robust screw or in the case of the P4 a robust gearbox. Nothing more is needed.
FULL VARIABLE SPEED
Hydraulic systems do not allow full control over its speed. EDD does; it lets you be in full control of its speed. The control handle works similar to an accelerator; just open it for optimum control.
OPTIMAL SAFETY – NO PRESSURE OR COMPRESSION
EDD contains no hydraulic fluid under pressure nor a pump or seals. A less obvious though important advantage is the lack of compression within the system. Compression of hydraulic fluid creates spring reaction forces. EDD has no such fluid compression. It is the safest choice for rescuers.P4 powered by EDD
The P4 is an already trusted tool for many special teams such as the Military, USAR and as well Fire Brigades. It brings self-contained battery-powered rescue tools to a whole new higher level of performance and capability.
P4 SPREADER
The P4 is one-of-a-kind and a “must have” for any rescue team. It can be converted from being a dedicated spreader to a cutter in just seconds using interchangeable tool attachments.
SWITCH
The P4 is one-of-a-kind and a “must have” for any rescue team. It can be converted from being a dedicated spreader to a cutter in just seconds using interchangeable tool attachments.
P4 CUTTER
The P4 comes in 2 different models, the short and long control handle version. Having the option for a short control handle downsizes the, already short in length P4 even further.Accessories
-
BATTERY BACKPACK 10 EDD
-
BATTERY CHARGER EDD
-
BATTERY PACK 1 EDD
-
POWER CONNECTOR EDD
-
AIRCRAFT JAW SET
-
LED LIGHT ADD-ON
-
COMPLETE YOUR KIT WITH THE POWER PUSHER RAM
Download the Brochure
X2 EDD SPREADER
| Dimensions (L x W x H) | 891 x 256 x 258 mm |
| Operational weight | 22.9 кг |
| Max. spreading opening | 607 mm |
| Max. spreading force at base of jaw | 342 kN / 34.9 ton |
| Max. spreading force 25 mm from tips | 173.2 kN / 17.7 ton |
| Max. pulling opening | 83.2 kN / 8.5 ton |
| Max. pulling opening | 426 mm |
| Max. pulling force | 91.2 kN / 9.3 ton |
| Max. squeezing force at base of arm teeth | 120.9 kN / 12.3 ton |
G4C EDD CUTTER
| Dimensions (L x W x H) | 777 x 238 x 242 mm |
| Operational weight | 15.9 кг |
| Max. spreading opening | 150 mm |
| Reach | 129 mm |
| Max. cutting force | 442 kN / 45.1 ton |
G6C EDD CUTTER
| Dimensions (L x W x H) | 937 x 268 x 259 mm |
| Operational weight | 22.9 кг |
| Max. spreading opening | 203 mm |
| Reach | 147 mm |
| Max. cutting force | 954 kN / 97.3 ton |
V4 EDD CUTTER
| Dimensions (L x W x H) | 637 x 131 x 352 mm |
| Maximum extended length | 937 mm |
| Maximum stroke | 300 mm |
| Operational weight | 16.9 кг |
| Max. spreading / pushing force | 98.1 kN / 10 ton |
P4X EDD SPREADER
| Dimensions (L x W x H) | 711 x 285 x 267 mm |
| Operational weight | 19.8 кг |
| Rotating head angle | 61° |
| Max. spreading opening | 401 mm |
| Max. spreading force at base of jaw | 170.8 kN / 17.4 ton |
| Max. spreading force 25 mm from tips | 117.0 kN / 11.9 ton |
| Max. pulling opening | 62.7 kN / 6.4 ton |
P4W EDD CUTTER
| Dimensions (L x W x H) | 706 x 285 x 267 mm |
| Operational weight | 21.5 кг |
| Max. cutting opening | 147 mm |
| Reach | 118 mm |
| Max. spreading force 25 mm from tips | 981 kN / 100.0 ton |